Narrow & Shallow Wine Cabinets
Built for the wall you actually have: a 260 mm service void, the strip beside a doorway, the 300 mm return next to a fridge. Shallow cabinets hold bottles neck-out and still close a door.
What this one is
One page inside the by room and position group — from 260 mm deep · from 300 mm wide. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It fixes to the wall, which keeps the floor clear and puts the bottles at eye level.
It is built into the joinery, flush with the surrounding panels.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 6 – 60 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is From 260 mm — neck-out storage without a protruding door. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width From 300 mm; height Up to 3,000 mm; depth From 260 mm — neck-out storage without a protruding door; capacity 6 – 60 bottles; lead time 25 – 35 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Shallow depth · Wall · Built-in are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- From 300 mm
- Depth
- From 260 mm — neck-out storage without a protruding door
- Height
- Up to 3,000 mm
- Capacity
- 6 – 60 bottles
- Storage
- Neck-out cradle · label-out on deeper units
- Cooling
- Optional on 300 mm and deeper
- Glass
- Clear or fluted, 18 mm stainless frame
- Lead time
- 25 – 35 days
Lead times quoted per project.
More by room and position
Kitchen Wine Storage
Built into the kitchen, not bolted onto it
View
Corner Wine Racks
Folded into the angle · No back panel
View
Wine Closets
A closet that becomes a cellar
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a narrow & shallow wine cabinets
Can a 260 mm cabinet be cooled?
Not properly. Below 300 mm there is no room for the evaporator and the air gap, so a narrow run is normally dry storage paired with a separate cooled unit nearby.
How do bottles fit in 260 mm?
Neck-out. The cradle is set at a slight angle so the bottle sits stable and the label faces the side you choose. We label which rows take Burgundy, which is wider.
Can it be flush with the wall?
Yes — on a 260 mm cabinet the door sits inside the frame rather than on it, so the front face is flat and can be scribed into a plaster reveal.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.