Kitchen Wine Storage
Wine storage that belongs to the kitchen joinery: a glass-front column at the end of the run, a rack in the island end panel, a cooled drawer under the counter. One finish across all three.
What this one is
One page inside the by room and position group — built into the kitchen, not bolted onto it. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It works as an island or counter division, finished on both faces.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 12 – 160 bottles across elements. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 / 350 / 420 / 600 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 1,200 mm per element; depth 300 / 350 / 420 / 600 mm; capacity 12 – 160 bottles across elements; lead time 30 – 40 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Kitchen run · Island · Pantry are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Positions
- Tall column · island end · under-counter · pantry
- Width
- 300 – 1,200 mm per element
- Depth
- 300 / 350 / 420 / 600 mm
- Capacity
- 12 – 160 bottles across elements
- Matching
- Colour-matched to your kitchen door supplier
- Cooling
- Optional, single or dual zone
- Glass
- Clear · fluted · tinted, 18 mm frame
- Lead time
- 30 – 40 days
Lead times quoted per project.
More by room and position
Corner Wine Racks
Folded into the angle · No back panel
View
Wine Closets
A closet that becomes a cellar
View
Under-Stair Wine Cellars
Follows the rake · No wasted triangle
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a kitchen wine storage
Can you match a kitchen that is already ordered?
Yes. Send the door sample or the RAL code and we match the stainless to it. If the kitchen is a foil or lacquer finish, we match the tone rather than the sheen, and we say so on the drawing before you commit.
Does the kitchen run have to be interrupted?
No. The wine element is a separate carcass the same depth as the run, so the kitchen supplier works around it and nobody is waiting on anybody.
Where should the cooled part go?
As far from the hob and the oven as the layout allows, and with the plinth grille not blocked by a bin or a skirting. We mark the grille zone on the drawing.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.