Wine Cabinets
Every cabinet we make starts with your wall, not a size chart. 600 mm to 4,000 mm wide, glass-front, solid, open rack or temperature controlled — and all of it in stainless.
What this one is
One page inside the head terms group — the umbrella page for the whole range. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
It turns a corner, where two runs meet at an angle.
Bottle fit and cradle pitch
Capacity for this model runs 12 – 900 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 260 – 450 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 600 – 4,000 mm, made to your wall; height Up to 3,200 mm in one unit; depth 260 – 450 mm; capacity 12 – 900 bottles; lead time 25 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in · Corner are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 600 – 4,000 mm, made to your wall
- Height
- Up to 3,200 mm in one unit
- Depth
- 260 – 450 mm
- Capacity
- 12 – 900 bottles
- Structure
- 1.2 mm folded stainless frame
- Interior
- Stainless · Acrylic · Oak · Glass
- Cooling
- None · integrated · dual zone
- Lead time
- 25 – 45 days
Lead times quoted per project.
More head terms
Wine Storage
How to store wine without a cellar room
View
Glass-Front Wine Cabinets
18 mm stainless frame · Clear or fluted glass
View
Wine Fridge Cabinets
Cabinet and cooling from one factory · 110 V ready
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wine cabinets
What makes this different from a wine fridge?
A wine fridge is a box that fits a hole. This is the wall — the cooling is sized to the cabinet, not the cabinet chosen around a fridge.
Can I start with racks and add cooling later?
Only if you tell us at the drawing stage. Retrofitting cooling means the plinth, back panel and shelf spacing all change.
How do I know which type I need?
Send a photo of the wall and the bottle count. We come back with one recommendation, not a catalogue.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.