Corner Wine Racks
An open stainless rack that turns a corner without a corner post, using the two walls as the structure. Cheaper than a cabinet, and the bottles carry the corner visually.
What this one is
One page inside the by room and position group — folded into the angle · no back panel. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It fixes to the wall, which keeps the floor clear and puts the bottles at eye level.
It turns a corner, where two runs meet at an angle.
Bottle fit and cradle pitch
Capacity for this model runs 18 – 120 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 120 / 300 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 1,200 mm per leg; height Up to 2,800 mm; depth 120 / 300 mm; capacity 18 – 120 bottles; lead time 20 – 30 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Corner · Wall · Floor are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Angle
- 90° standard, other angles to order
- Width
- 300 – 1,200 mm per leg
- Height
- Up to 2,800 mm
- Depth
- 120 / 300 mm
- Capacity
- 18 – 120 bottles
- Structure
- Wall-fixed uprights, no corner post
- Finish
- Matte black · brushed · gold titanium · rose gold
- Lead time
- 20 – 30 days
Lead times quoted per project.
More by room and position
Wine Closets
A closet that becomes a cellar
View
Under-Stair Wine Cellars
Follows the rake · No wasted triangle
View
Dining Room Wine Storage
Within arm’s reach of the table
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a corner wine racks
Is there a post in the corner?
No. Both legs fix to their own wall and the cradles meet in the angle, which is what keeps the corner usable.
Label out or neck out in a corner?
Label-out on the 300 mm version, neck-out on the 120 mm version. In a corner the shallow version is usually the one that works, because two 300 mm racks meeting at 90° eat a lot of floor.
Can it be cooled?
No. An open rack in a corner blocks exactly the airflow a cellar needs, so racks are for rooms that are already conditioned.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.