Glass-Front Wine Cabinets
A full-height glass door on a stainless frame narrow enough to disappear. The frame is a folded 1.2 mm profile, not an aluminium extrusion with a cover cap.
What this one is
One page inside the head terms group — 18 mm stainless frame · clear or fluted glass. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
Bottle fit and cradle pitch
Capacity for this model runs 24 – 320 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 / 350 / 420 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 600 – 4,000 mm; height Up to 3,200 mm in one unit; depth 300 / 350 / 420 mm; capacity 24 – 320 bottles; lead time 25 – 35 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in · Tall are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 600 – 4,000 mm
- Height
- Up to 3,200 mm in one unit
- Depth
- 300 / 350 / 420 mm
- Capacity
- 24 – 320 bottles
- Frame sightline
- 18 mm stile · 22 mm rail
- Glass
- Clear · Tinted · Grey · Fluted · Low-E
- Lead time
- 25 – 35 days
Lead times quoted per project.
More head terms
Wine Fridge Cabinets
Cabinet and cooling from one factory · 110 V ready
View
Wine Storage Cabinets
Closed storage · Glass optional
View
Wine Walls
One continuous run of glass, skirting to ceiling
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a glass-front wine cabinets
Can the frame really be 18 mm?
Yes. A folded 1.2 mm stainless profile holds its shape at that width — an aluminium extrusion at 18 mm would need a cover cap and would show a seam.
Will the glass fog?
Not on a non-cooled unit. Cooled units use double glazing with a heated perimeter on the warm side, switched with the room light.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.