Wine Storage Cabinets
A closed cabinet for the bottles you are not displaying: cases, magnums, the ones you bought six of. Glass on the upper run, solid doors below.
What this one is
One page inside the head terms group — closed storage · glass optional. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
Bottle fit and cradle pitch
Capacity for this model runs 30 – 400 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 350 / 420 / 450 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 600 – 3,000 mm; height Up to 2,700 mm; depth 350 / 420 / 450 mm; capacity 30 – 400 bottles; lead time 25 – 35 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 600 – 3,000 mm
- Height
- Up to 2,700 mm
- Depth
- 350 / 420 / 450 mm
- Capacity
- 30 – 400 bottles
- Doors
- Solid · Fluted glass · Clear glass
- Interior
- Pull-out cradle trays on runners
- Lead time
- 25 – 35 days
Lead times quoted per project.
More head terms
Wine Walls
One continuous run of glass, skirting to ceiling
View
Wine Storage Racks
High-density bottle storage in stainless
View
Small Wine Cabinets
12 to 60 bottles, without the dead space
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wine storage cabinets
Can the bottom half be solid and the top glass?
That is the most common configuration — display above eye level, closed storage below. We set the split on the drawing.
Do the trays pull out fully?
Full extension on concealed runners, rated 45 kg per tray.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.