Wine Storage Racks
Racks built for count rather than display: dense rows, shallow depth, and a cradle depth chosen so no bottle stands proud of the frame.
What this one is
One page inside the head terms group — high-density bottle storage in stainless. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It fixes to the wall, which keeps the floor clear and puts the bottles at eye level.
It hangs from the ceiling structure, leaving the floor completely open.
Bottle fit and cradle pitch
Capacity for this model runs 24 – 240 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 250 / 300 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 400 – 3,000 mm; height Up to 3,000 mm; depth 250 / 300 mm; capacity 24 – 240 bottles; lead time 20 – 30 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Wall · Ceiling are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 400 – 3,000 mm
- Height
- Up to 3,000 mm
- Depth
- 250 / 300 mm
- Capacity
- 24 – 240 bottles
- Density
- Up to 6 bottles per 300 mm row
- Finish
- Brushed · Sandblasted · Coated
- Lead time
- 20 – 30 days
Lead times quoted per project.
More head terms
Small Wine Cabinets
12 to 60 bottles, without the dead space
View
Wine Storage Ideas
Eleven layouts we actually build
View
Wine Racks
Open stainless · No glass · Full access
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wine storage racks
How many bottles per metre?
About 20 per metre of width on a three-row stack at 300 mm centres. It changes with bottle diameter — tell us what you drink.
Can it take magnums?
Yes, on a designated row. Mixed diameters on one row waste space, so we label rows.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.