Small Wine Cabinets
Small does not mean a box in a corner. These are the same folded stainless frames at a smaller scale, sized to the gap you actually have.
What this one is
One page inside the head terms group — 12 to 60 bottles, without the dead space. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It fixes to the wall, which keeps the floor clear and puts the bottles at eye level.
It sits under the counter, sized to the run above it.
It turns a corner, where two runs meet at an angle.
Bottle fit and cradle pitch
Capacity for this model runs 12 – 60 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 260 – 350 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 900 mm; height 300 – 1,800 mm; depth 260 – 350 mm; capacity 12 – 60 bottles; lead time 20 – 30 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Under-counter · Wall · Corner are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 300 – 900 mm
- Height
- 300 – 1,800 mm
- Depth
- 260 – 350 mm
- Capacity
- 12 – 60 bottles
- Mounting
- Under-counter · Wall-hung · Floor
- Cooling
- Optional, single zone
- Lead time
- 20 – 30 days
Lead times quoted per project.
More head terms
Wine Storage Ideas
Eleven layouts we actually build
View
Wine Racks
Open stainless · No glass · Full access
View
Wine Cabinets
The umbrella page for the whole range
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a small wine cabinets
What is the smallest you build?
A 300 mm wide under-counter unit at 12 bottles. Below that the per-bottle cost climbs and we will tell you so.
Can it sit in a 340 mm gap under a worktop?
Yes — 260 mm body plus door swing. We set the hinge side on the drawing.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.