20 Inch Wine Cabinets
Twenty inches is what you get when a 24 inch bay is not available but 18 is too small. Built to your number, not rounded to a catalogue size.
What this one is
One page inside the by size and capacity group — 508 mm — between the standard bays. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It is built into the joinery, flush with the surrounding panels.
It sits under the counter, sized to the run above it.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 27 – 48 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 600 mm body. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: height 760 – 2,100 mm; depth 600 mm body; capacity 27 – 48 bottles; lead time 25 – 30 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Under-counter · Built-in are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Outside width
- 508 mm / 20 in
- Height
- 760 – 2,100 mm
- Depth
- 600 mm body
- Capacity
- 27 – 48 bottles
- Fit
- Non-standard bay, renovation
- Cooling
- Optional single zone
- Lead time
- 25 – 30 days
Lead times quoted per project.
More by size and capacity
30 Inch Wine Cabinets
762 mm — three columns, full depth
View
36 Inch Wine Cabinets
914 mm — the widest single-door bay
View
12 Inch Wine Cabinets
305 mm — the narrowest we build
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a 20 inch wine cabinets
My opening is 505 mm, not 508.
Then we build 505 mm. Every cabinet is cut to the number you give us.
Can you match an existing cabinet front?
In stainless yes. In timber we can supply a stainless frame that accepts your own door panel.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.