12 Inch Wine Cabinets
Twelve inches is a filler gap, not a bay. It still takes a full-depth bottle and a real frame, and it is often the only space left in a finished kitchen.
What this one is
One page inside the by size and capacity group — 305 mm — the narrowest we build. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It fixes to the wall, which keeps the floor clear and puts the bottles at eye level.
It sits under the counter, sized to the run above it.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 12 – 21 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 600 mm body · 350 mm bottle depth. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: height 760 – 1,800 mm; depth 600 mm body · 350 mm bottle depth; capacity 12 – 21 bottles; lead time 20 – 25 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Under-counter · Wall are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Outside width
- 305 mm / 12 in
- Height
- 760 – 1,800 mm
- Depth
- 600 mm body · 350 mm bottle depth
- Capacity
- 12 – 21 bottles
- Fit
- Filler bay, end panel gap
- Cooling
- Not available at this width
- Lead time
- 20 – 25 days
Lead times quoted per project.
More by size and capacity
12 Bottle Wine Cabinets
One case, at the right temperature
View
24 Bottle Wine Cabinets
Two cases, one narrow footprint
View
36 Bottle Wine Cabinets
Three cases · The display size
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a 12 inch wine cabinets
Why no cooling at 12 inches?
The compressor and its airflow need more width than that. At this size it is a rack or a closed cabinet, not a fridge.
Can it go between two cabinets with no end panel?
Yes, with a shared mullion. We need the exact gap — not the nominal cabinet widths.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.