762 mm — three columns, full depth

30 Inch Wine Cabinets

Thirty inches gives three bottle columns in a single bay, which is the point where a cabinet stops being a token and starts being storage.

Reviewed by Stone Zeng, Export DirectorUpdated Factory Shunde, Foshan

What this one is

One page inside the by size and capacity group — 762 mm — three columns, full depth. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.

Where it goes

It is built into the joinery, flush with the surrounding panels.

It sits under the counter, sized to the run above it.

It is built with integrated cooling rather than a separate chiller.

Bottle fit and cradle pitch

Capacity for this model runs 45 – 78 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.

Depth is 600 mm body. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.

What the drawing fixes

Everything on the drawing comes back to four numbers: height 760 – 2,100 mm; depth 600 mm body; capacity 45 – 78 bottles; lead time 25 – 35 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Under-counter · Built-in are the mounting conditions this one is drawn for.

Finish

Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.

Outside width
762 mm / 30 in
Height
760 – 2,100 mm
Depth
600 mm body
Capacity
45 – 78 bottles
Columns
Three bottle columns
Cooling
Single or dual zone
Lead time
25 – 35 days

Lead times quoted per project.

Also in this group

More by size and capacity

30 Inch Wine Cabinets — stainless steel detail, BOGEQI
30 Inch Wine Cabinets — stainless steel detail, BOGEQI
30 Inch Wine Cabinets — stainless steel detail, BOGEQI
30 Inch Wine Cabinets — stainless steel detail, BOGEQI

Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.

Questions

Before you order a 30 inch wine cabinets

Can it be dual zone at 30 inches?

Yes — a horizontal divider, red above white. The divider costs you one row.

Does a wider cabinet need a centre mullion?

Above 900 mm yes, for door rigidity. At 762 mm a single door is still fine.

Custom stainless steel wine cabinet, lit interior
Next step

Send the wall, not the wish list

Three photographs and the bottle count is enough for a scheme and a fixed price.