Transfer Print
Transfer Print is one of the eight stainless finish families we hold in the factory. Sharp, high-contrast pattern transfer. The most economical route to a strong surface, and the sharpest edge definition of any of the eight families.
What Transfer Print is
Sharp, high-contrast pattern transfer. The most economical route to a strong surface, and the sharpest edge definition of any of the eight families. It is a stainless steel wine cabinet finish, applied in the same workshop that folds the frame, which is why a code and a cabinet can be confirmed on the same drawing.
Where it works
- Bold patterns on feature doors.
- Projects with a tight budget and a specific pattern brief.
- Small panels where a fine pattern reads as detail rather than noise.
Where it does not
- Large flat runs — a strong pattern on 3 m of door becomes overwhelming.
Care
Damp cloth. Keep solvent away from the print edge.
The 7 codes in this family
MZG-01 M, MZG-02 E, MZG-03 M, MZG-04 I, MZG-05 P, MZG-06 E, MZG-07 V.
MZG at a glance
- Codes
- 7 (MZG-01 to MZG-07)
- Family
- Transfer Print
- Substrate
- Stainless steel
- Matching
- RAL code, or a physical sample posted to us
- Sample
- Swatch photographs on this page are our own samples
Transfer Print — the full range
How a finished cabinet reaches you
- Made in
- Shunde, Foshan, China — frame, finish and assembly in one workshop
- Frame
- 18 mm stainless sightline, folded to the measured wall
- Materials
- Stainless steel, tempered or low-E glass, felt-lined bottle cradle
- Cooling
- Embraco compressor, 110 V / 60 Hz for the US, 220–240 V elsewhere
- Production
- 30 to 40 days after the 50% production deposit, quoted per project
- Delivery
- Crated, collected by your forwarder, with a numbered setting-out drawing
- Installation
- By your fitter, to our drawing; we dry-fit and inspect before crating
Not sure which family suits the room?
Send a photograph of the space and the joinery it has to sit against. We will come back with two or three codes rather than all 63.