Kitchen Island Wine Storage
The 600 mm end panel of a kitchen island takes a rack, a glass-front column or a cooled drawer — wine in the room where the cooking and the company already are.
What this one is
One page inside the by room and position group — the end panel nobody uses. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It works as an island or counter division, finished on both faces.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 12 – 60 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 – 600 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 900 mm; depth 300 – 600 mm; capacity 12 – 60 bottles; lead time 30 – 40 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Island · End panel · Counter are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Positions
- Island end panel · back of island · under overhang
- Width
- 300 – 900 mm
- Depth
- 300 – 600 mm
- Capacity
- 12 – 60 bottles
- Forms
- Open cradle · glass-front column · cooled drawer
- Cooling
- Under-counter unit, front-vented
- Matching
- Colour-matched to island finish
- Lead time
- 30 – 40 days
Lead times quoted per project.
More by room and position
Pantry Wine Storage
The pantry, upgraded to a cellar
View
Bar Cabinets
Bottles below · glass above · one frame
View
Built-In Wine Cabinets
Flush with the wall · Zero clearance
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a kitchen island wine storage
Is the island strong enough?
A bottle column adds load, so we specify it against the island carcass and your joiner reinforces the end panel. It is a 20-minute job if it is planned before the island is built.
Where does a cooled drawer vent?
Through the plinth on the island. If the island has no plinth, a cooled unit does not belong there and we would specify an open rack instead.
Can it be retrofitted to an existing island?
Yes for an open rack, if the end panel can be removed. A cooled drawer in an existing island is usually not worth the disruption.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.