Built-In Wine Cabinets
A cabinet designed to disappear into a wall, with a flush front, a scribe that absorbs the plaster, and ventilation through the plinth rather than through a side gap.
What this one is
One page inside the by room and position group — flush with the wall · zero clearance. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It is built into the joinery, flush with the surrounding panels.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 12 – 300 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 – 450 mm carcass, no rear clearance. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 2,400 mm; height Up to 3,200 mm; depth 300 – 450 mm carcass, no rear clearance; capacity 12 – 300 bottles; lead time 30 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Built-in · Flush · Recessed are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Install
- Flush · recessed · between two walls
- Width
- 300 – 2,400 mm
- Height
- Up to 3,200 mm
- Depth
- 300 – 450 mm carcass, no rear clearance
- Capacity
- 12 – 300 bottles
- Scribe
- Up to 40 mm per side, part of the build
- Cooling
- Optional, front-vented through the plinth
- Lead time
- 30 – 45 days
Lead times quoted per project.
More by room and position
Tall Wine Cabinets
Up to 3,200 mm in one frame
View
Wide & Large Wine Cabinets
4,000 mm and beyond, in modules
View
Basement Wine Storage
The steadiest room in the house for wine
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a built-in wine cabinets
Is a 40 mm scribe extra?
No. A scribe is part of the build, because a plastered opening is never square. It is the difference between a built-in and a cabinet pushed into a hole.
Does it need a frame around it?
It needs an opening, not a frame. The stainless front frame covers the reveal and the scribe covers the plaster, so there is no architrave to match.
Can it sit under a window?
Yes if the depth allows, and we set the top rail to clear the sill. Behind a radiator or a heat source, no — that is a cooling load nobody wins.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.