Home Bars
Back-bar, bottle storage and a serving counter designed for a house rather than a venue: stainless, glass and light, sized for a room and not a licence.
What this one is
One page inside the commercial group — a bar that is furniture, not an appliance. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 40 – 200 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 1,200 – 4,000 mm; height 900 mm counter, 2,100 mm back-bar; capacity 40 – 200 bottles; lead time 30 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in · Back-bar are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Elements
- Back-bar · bottle cradle · glass shelf · counter · niche
- Width
- 1,200 – 4,000 mm
- Height
- 900 mm counter, 2,100 mm back-bar
- Capacity
- 40 – 200 bottles
- Cooling
- Optional, wine side only
- Lighting
- Integrated, dimmable, 3,000 K
- Top
- Stainless, or stone by your supplier
- Lead time
- 30 – 45 days
Lead times quoted per project.
More commercial
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a home bars
Do I need a drain?
Not for wine. If there is a sink in the bar, yes, and it has to be planned before the cabinet is set because the waste runs through the plinth.
Can the bar be moved if we renovate?
A bar is built in modules for exactly that reason. It comes out and goes back in somewhere else, minus the cooling which is sized to its new room.
Can it hide a TV or a fridge?
It can hide a fridge behind a flush stainless door. A TV is usually better above the bar than inside it, because heat and a wine cellar do not mix.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.