Corner Bar Cabinets
A corner is the one place in a room where a bar does not need to justify its footprint. Angled front, bottle storage below, glass and counter above, stainless throughout.
What this one is
One page inside the by room and position group — the dead corner, turned into a bar. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It turns a corner, where two runs meet at an angle.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 30 – 120 bottles plus glassware. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 450 – 600 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 900 – 2,400 mm along each leg; height 900 – 1,100 mm bar height, or full height with a hutch; depth 450 – 600 mm; capacity 30 – 120 bottles plus glassware; lead time 30 – 40 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Corner · Bar height · Floor are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Angle
- Any, 90° to 135° most common
- Width
- 900 – 2,400 mm along each leg
- Height
- 900 – 1,100 mm bar height, or full height with a hutch
- Depth
- 450 – 600 mm
- Capacity
- 30 – 120 bottles plus glassware
- Top
- Stainless · sintered stone · quartz, by your supplier
- Cooling
- None · or an under-counter unit built into one leg
- Lead time
- 30 – 40 days
Lead times quoted per project.
More by room and position
Wall-Mounted Wine Racks
Bottles off the floor, wall left intact
View
Corner Wine Cabinets
Angled front · No dead triangle
View
Ceiling Wine Racks
Hangs from the slab · Floor stays clear
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a corner bar cabinets
Can the worktop be supplied by my own stone shop?
Yes, and we prefer it — you get a locally sourced top and we ship the cabinet with a template drawing and the cut-out positions marked on the frame.
What goes into the corner itself?
The angle is a folded stainless panel with a magnetic-seal door on the short face, so the corner holds bottles instead of being boxed off as dead space.
Can one leg be cooled and the other not?
Yes. A single under-counter unit is built into one leg and the other stays dry storage for glassware, which is usually the cheaper and more useful arrangement.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.