Tall Wine Cabinets
Floor-to-ceiling in a single frame, with the top rows on a pull-out cradle so the highest bottles are as reachable as the lowest.
What this one is
One page inside the by room and position group — up to 3,200 mm in one frame. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
It runs wall to wall, with the last module scribed to the plaster.
Bottle fit and cradle pitch
Capacity for this model runs 60 – 320 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 / 350 / 420 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 2,400 mm; height 2,000 – 3,200 mm in one unit; depth 300 / 350 / 420 mm; capacity 60 – 320 bottles; lead time 30 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Tall · Floor-to-ceiling · Built-in are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Height
- 2,000 – 3,200 mm in one unit
- Width
- 300 – 2,400 mm
- Depth
- 300 / 350 / 420 mm
- Capacity
- 60 – 320 bottles
- Access
- Fixed cradle · pull-out drawer on the top two rows
- Cooling
- Optional, single or dual zone
- Structure
- 1.2 mm folded stainless, no visible fasteners
- Lead time
- 30 – 45 days
Lead times quoted per project.
More by room and position
Wide & Large Wine Cabinets
4,000 mm and beyond, in modules
View
Basement Wine Storage
The steadiest room in the house for wine
View
Over-Fridge Wine Storage
The 400 mm above the fridge
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a tall wine cabinets
How do I reach the top row?
Above 2,200 mm we fit a pull-out cradle on the top two rows, which brings the bottles down to hand height. It is the difference between a tall cabinet that works and one that stores bottles nobody drinks.
Does a tall cabinet need to be fixed to the wall?
Yes, at the top. A 3,200 mm loaded cabinet is a lever, so we supply an anti-tip bracket and it is not optional.
One door or two?
One leaf up to 2,400 mm, two leaves above that. On a 3,200 mm cabinet a single leaf weighs too much for a comfortable pull.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.