50 Bottle Wine Cabinets
Fifty bottles fits one tall column at 350 mm depth. It is the size that turns a spare 450 mm of wall into a real cellar.
What this one is
One page inside the by size and capacity group — four cases plus · single column, full height. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 50 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 350 – 420 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 500 – 700 mm; height 1,800 – 2,400 mm; depth 350 – 420 mm; capacity 50 bottles; lead time 30 – 35 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Capacity
- 50 bottles
- Width
- 500 – 700 mm
- Height
- 1,800 – 2,400 mm
- Depth
- 350 – 420 mm
- Configuration
- Single tall column
- Cooling
- Single or dual zone
- Lead time
- 30 – 35 days
Lead times quoted per project.
More by size and capacity
100 Bottle Wine Cabinets
Eight cases · Where it becomes a feature
View
200 Bottle Wine Cabinets
Seventeen cases · Full wall territory
View
24 Inch Wine Cabinets
610 mm — the standard US base cabinet bay
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a 50 bottle wine cabinets
Can it be 450 mm wide?
Yes at 350 mm depth. At 420 mm depth the column needs 500 mm to keep a workable door.
Is a 2,400 mm tall unit stable?
It is fixed to the wall at the top and the plinth carries the load. We supply the fixing detail with the drawing.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.