Eight cases · Where it becomes a feature

100 Bottle Wine Cabinets

A hundred bottles is the point where a cabinet becomes the room. Two columns, or one run of glass wall at 1,800 mm wide.

Reviewed by Stone Zeng, Export DirectorUpdated Factory Shunde, Foshan

What this one is

One page inside the by size and capacity group — eight cases · where it becomes a feature. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.

Where it goes

It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.

It is built into the joinery, flush with the surrounding panels.

It runs wall to wall, with the last module scribed to the plaster.

Bottle fit and cradle pitch

Capacity for this model runs 100 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.

Depth is 350 – 420 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.

What the drawing fixes

Everything on the drawing comes back to four numbers: width 900 – 1,500 mm; height 2,100 – 2,700 mm; depth 350 – 420 mm; capacity 100 bottles; lead time 30 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in · Full-wall are the mounting conditions this one is drawn for.

Finish

Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.

Capacity
100 bottles
Width
900 – 1,500 mm
Height
2,100 – 2,700 mm
Depth
350 – 420 mm
Doors
Glass pair or open
Cooling
Dual zone recommended
Lead time
30 – 45 days

Lead times quoted per project.

Also in this group

More by size and capacity

100 Bottle Wine Cabinets — stainless steel detail, BOGEQI
100 Bottle Wine Cabinets — stainless steel detail, BOGEQI
100 Bottle Wine Cabinets — stainless steel detail, BOGEQI
100 Bottle Wine Cabinets — stainless steel detail, BOGEQI

Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.

Questions

Before you order a 100 bottle wine cabinets

Two doors or sliding?

Hinged pair to 1,500 mm. Above that sliding, because the door swing starts to cost you floor space in the room.

Can it be split red and white?

Yes, horizontally. A vertical split looks better in a narrow room but is harder to cool evenly.

Custom stainless steel wine cabinet, lit interior
Next step

Send the wall, not the wish list

Three photographs and the bottle count is enough for a scheme and a fixed price.